IONIQ 5 Companion

IONIQ 5 Companion is an independent diagnostic tool for the Hyundai IONIQ 5 and IONIQ 5 N, now with full support for the Kia EV6 and EV9, IONIQ 6, and IONIQ 9. Plug in an ELM327-compatible BLE OBD-II adapter and it reads battery, charging, tire, and ECU data from your car. A built-in History records every drive and charge and syncs across your devices via iCloud. CARPLAY - Two rows of live chips on the Driving tab — charge, power, tires, climate, and more - Chips include Power (draw and regen on one dial), Compass (optionally replacing the odometer), AC Draw (live volts, amps, kW), and Cell Voltage Δ (a per-cell heatmap) - Dynamic Charging and EVSE tabs during charging, with a session timer and the charger's capabilities HISTORY & ICLOUD - History tab records every drive and charge, with live State-of-Charge charts plus distance, energy, peak-power, and battery-temperature ranges - 50+ signals logged over time on charts you can pinch, pan, and scrub — voltages, temperatures, motor RPM, isolation resistance, charging power, and more - Optional iCloud sync keeps your history in step across iPhone, iPad, and Mac - Attach a photo and share a clean report card with one tap LIVE DASHBOARD - State of charge, available energy, voltage, current - Power dial, Regeneration gauge, Gear indicator (P, R, N, D), Isolation Resistance chip, and Polling Headroom indicator - Cell min/max temperature and per-cell voltages as a color-coded heatmap with an explainer - Tire pressures and temperatures, motor RPM, ignition state, battery heater status - 12V auxiliary battery — charge, voltage, current, temperature, plus DC-DC converter telemetry - Outside and cabin temperature, relative humidity, headlight and brake-light indicators CHARGING TELEMETRY - Live AC and DC charging detection - Session detail plots Charging Power, Pack Voltage, battery and ambient temperature, banded by AC, DC, and preconditioning - DC fast charging: an EVSE Current chart compares requested vs. delivered current, plus an EV Supply Equipment card with the station's max power, voltage, and current (J1772 + CCS) - Live "Time to 70°F / 21°C" battery ETA for optimal DC fast charging CONNECTION & SETTINGS - Connect, disconnect, and toggle Auto-Connect to share one adapter between apps - Keep Screen Awake while the app is in the foreground - Choose Power units (kW, HP, PS) and Efficiency units (mi/kWh, km/kWh, kWh/100km, Wh/km, Wh/mi) ADVANCED TOOLS - J1979 OBD-II Scanner — standard mode 01-09 read-out for adapter compatibility - ECU Finder maps every ECU; DID Range Scan probes one across an address range; Curated DID List scans all 65535 addresses; an A/B/C test hunts new signals, with sharing PRIVACY BY DESIGN The app does not collect, transmit, or sell personal data. No analytics, ads, or accounts. Vehicle data stays on your device and your private iCloud. Logs are exported only when you tap Share. Full privacy policy at https://www.theburl.com/ioniq-app/privacy.html REQUIREMENTS ELM327-compatible BLE OBD-II adapter — see https://www.theburl.com/ioniq-app/support.html for tested adapters. Full support: Hyundai IONIQ 5 and IONIQ 5 N, Kia EV6 and EV9, Hyundai IONIQ 6, and IONIQ 9. Signal coverage varies by model, year, and trim. NOT AFFILIATED IONIQ 5 Companion is not affiliated with, endorsed by, or sponsored by Hyundai Motor Company or Kia Corporation. IONIQ is a trademark of Hyundai Motor Company; EV6 and EV9 are trademarks of Kia Corporation. This independent tool reads your own vehicle's data using open OBD-II and UDS standards (ISO 15031, ISO 14229).