SimbaVMS

[New] 1. Support WIFI hotspot setting function 2. AI simplifies sensitivity and increases the types of water and food consumed 3. New 5G type added to network status 4. Add BSD calibration drag point boundary restrictions 5. Support WIFI hotspot setting function 6. AI simplifies sensitivity and increases water and food types 7. Add BSD calibration drag point boundary restrictions 8. Passenger flow calibration: Add four calibration points [Fix] 1. Fix the difficulty of sliding in the yellow and red areas of the reverse image 2. Fix audio settings - only display shutdown prompt when changing audio format 3. Fix simulation trigger - Unified unit KM/H 4. Fix the simulation trigger - there are two car proximity alarm options in English mode. 8. Fix the EXT in the disk formatting prompt that has not been modified or disaster recovered 5. AI simulation triggers interface to delete unsupported alarm types (delete according to the type notified by the application) 6. MT95L-A3 equipment requires that the oil level be allowed to set the total oil quantity 7. When the passenger flow calibration point is set to the refresh button, the calibration point cannot slide out 8. Passenger flow calibration setting, entering direction, head up display, speed setting, translation error 9. The English translation for the power on/off setting is too long, and a device translation is used instead [Optimization] 1. Track replay: The vehicle icon rotates in the direction of movement 2. Real time preview video display delay issue after zooming in 3. Optimize the overall calibration page button for excessive occlusion issues

[Fix] 1. IC card company information adjusted to display as issuing authority 2. Change the send button on the text distribution interface to a query button 3. Disable the maximum value setting of fuel tank sensor data 4. WIFI settings allow users to enable/disable WIFI 5. Limit the load function by adding a calibration parameter upper limit 6. Fix the issue of abnormal simulation trigger speed settings 7. [Direct Version] Fixed the issue of abnormal channel display after setting the camera to video or vertical mirroring 8. [Direct Version] Fixed the 265/264 video format transcoding error in the direct version video download 9. Fix the issue of displaying the version number of Yunwei Bao in vehicle information query. 10. Fix the problem of SIM card display error in network function in English environment 10. BSD in the installation wizard may cause crashes 11. Fix the initial display of unsupported function screens on the gimbal page 12. Repairing and refreshing the vehicle status may result in the possibility of changing to other vehicle information 13. Fix the configuration of the direct connection platform and wifi configuration to display the self screen when first loaded 14. Fix the failure of the return button on the card reader/sound and light alarm circuit page 15. Fix DSM left and right function buttons not displaying 16. Fix the issue of occlusion in the top search bar 17. [Direct Version] Fix Direct Version Video Download 265/264 Video Format transcoding error 18. [Direct Connection Version] Fix the problem of missing export parameters [New] 1. Added BLE Bluetooth setting function 2. Add serial port types to serial port settings 3. Preview overlay and add overlay content 4. BSD calibration adds boundary restrictions 5. Simulate triggering DSM1 to add the function of not wearing a seat belt 6. The storage setting loop should be covered and checked to add prompt information 7. ADAS sensitivity increases for front vehicle start alarm type 8. Support ACR200 volume setting 9. Support AAL100 settings

[New Features] 1.Added load weight functionality 2.Vehicle tree bottom supports displaying more data (solves lag with large data) 3.Homepage supports vehicle status refresh button (for slow status updates) 4.After setting phone number in vehicle info, supports 5 cyclic queries 5.Added selection limits to vehicle favorites page [Fixes] 1.Completed Arabic and Thai translations for video playback, fatigue driving, version logs, serial port type pages 2.Fixed power settings bottom content overlap 3.Simulated trigger keeps two decimal places for miles 4.Changed driving recorder data layout 5.Snapshot count disabled when switching modes in lift/cover interface 6.Fixed installation wizard IO page bottom content overlap 7.Fixed Chinese text appearing in Arabic real-time positioning 8.Fixed BSD calibration speed settings content overlap 9.Fixed direct connection factory reset button failure 10.Fixed display issues when first using some features in direct connection mode 11.Fixed video search function failure in Arabic language environment 12.Fixed icon misalignment when switching login slider

The local network is not turned on, resulting in a white screen

1. Increase TCP direct communication with devices

1. When performing ADAS calibration and returning to the upper-level page on unsupported devices, there will be layout disorders. 2. The function ID calibration part should be changed to the customized status. 3. Multiple states should be added to the vehicle tree. 4. When modifying the vehicle information online number, the search will show a failure when searching again. 5. There is no prompt when scanning a non-existent account with a sub-account.

1. The scanning function in the hidden server adopts a new interface, while the rest of the servers remain unchanged

newly added: 1. Scan the code to associate with the vehicle 2. Function ID judgment 3. Camera settings switch to video playback 4. Simulate triggering to increase testing mode 5. Image playback, select the server for storage location, and when prompted that there are no device images, a prompt will appear 6. Add display order to boot preview

newly added: 1. Added HOD calibration, BSD1-4 calibration, DSM left and right rudder calibration 2. Add five levels of sensitivity 3. Add simulation triggered demonstration mode Fix: 1. Coverage of the first line of Russian text 2. Vietnamese has Chinese language issues 3. Bottom occlusion in boot preview: Vietnamese, Spanish, English

New Additions: 1. Added Russian, Thai, Vietnamese, Spanish, and Portuguese. 2. Vehicles support search by license plate number/SN number/terminal ID. 3. Added the display of the locked status in the platform configuration/device. 4. Enabled the functions of preview overlay, audio settings, boot preview, power on/off settings, and power settings. Fixes: 1. Fixed the problem that a white screen appears when clicking query after modifying and saving the camera settings. 2. Added a prompt for devices that do not support the pan-tilt and card reader. 3. Fixed the issue that adding a new vehicle to the fleet fails. Allowed the selection of the company itself in the organization selection. 4. Fixed the problem of the input blocking of the DNS server for the engine number and WiFi information in the network-connected version of vehicle information. 5. Real-time Preview: 5.1. There is a problem of channel mismatch in real-time preview. 5.2. When double-clicking the channel, the channel name is blocked by the top. 6. In preview overlay, changed the GPS speed to GNSS speed. 7. For the main and sub-streams: When the bitrate type is selected as variable bitrate, the corresponding bitrate should be grayed out, and others should be in bold; when it is fixed bitrate, the corresponding image quality should be grayed out, and others should be in bold.

New features: 1. Login error prompt 2. Change the SIM card number in the device to IMSI (SIM card) 3. Application for ICP filing, listing in Chinese Mainland - application in progress 4. Add the function of adding a car 5. Add feature search 6. Double click to enlarge real-time video Repair function: 1. The speed information in English/Chinese is not visible 2. Operation and maintenance image playback does not support playback 3. Incorrect rendering of camera format 4. Video playback: Pause associated with return button When viewing disk information, the usage status does not display any content, such as' none ',' full ', or' overwritten '

1. Verify IP/port and login information 2. The sub account device tree cannot be displayed

1. Real time preview: View the real-time status of the vehicle online 2. Video playback: View the vehicle's historical video status 3. Trajectory playback: Record the trajectory information of the vehicle and trace its historical trajectory 4. Real time positioning: locate the real-time position of the vehicle 5. Operation and maintenance function: remotely issue instructions to operate vehicles

修复实时视频拉长问题

video play debug

支持显示 车牌号

1. 修复获取车辆信息有误

修复登录bug问题

修复登录输入框问题

添加新的语言支持

修复轨迹回放bug问题

修复已知bug问题

修复bug问题

修复已知bug

修复已知bug