Home › Productivity
US
1 of 1 storefronts
Content in en-US
Content in en-US
Information
Apple ID1559484753
Bundle IDNV.Yarn-Yardage
SellerSeller
Min iOS14.4
Min macOS11.0
Device familiesiphone, ipad, ipod
Released2021-03-25
Copyright© Nikolay Vysochin
Privacy policyLink ↗
Preview 2 platforms
iPhone 5 images
iPad 5 images
What’s New Version 2.5
Added function of reverse rotation in case you need to undo some loop counts while winding on a skein.
Description
Ensure your device is equipped with magnetometer.
Mount a magnet (e.g. fridge magnet) on the end of one of your Swift's shoulders bottom side.
Measure the length of one loop of your Swift and type in the value in meters or yards. Note that corresponding unit (yard or meter) will be updated automatically. You need to do it only once. When you open the app next time the loop length will be recalled from the app's memory. If you use a different Swift, the loop length value needs to be updated.
Place your device with the Yarn Yardage app under the swift so that when it rotates the magnet goes above the device .
Turn the shoulder with the magnet away from the device.
Press "START" and start rotations. Each rotation will be detected by the app and loops, meters, yards numbers will be updated on the app screen.
When done measuring the yarn yardage, press "STOP". This does not clear the calculated number of meters/yards. The number of meters/yards is cleared when start is pressed again.
It is possible to continue counting after "STOP" is pressed. You can start without resetting measured yarn values by selecting "Without RESET".
You can view the history of measurement sessions. The History button is added below the Instructions button.
Button f(x) opens a calculation section with helpful calculation functions. Proportion and yarn length calculations are available.
Accessibility
ipadiphonemacrealityDevicetvoswatch
Version history 9 versions
Build 865658789v2.52024-05-03 11:08:30
Added function of reverse rotation in case you need to undo some loop counts while winding on a skein.
Build 859190015v2.32023-08-16 14:13:08
Added Before/After yarn washing modes of taking measure on the app's front-end. Default is Before Washing.
Added Work Title on the app's front-end so that it can be captured during taking a screenshot and also recorded in the history for future references.
New calculation of yarn length added to f(x) button. It can be helpful to calculate changed length of a yarn after washing as it may affect the loop length, hence the overall yarn length.
Improved history details and robustness.
Build 853315258v2.22022-11-13 14:16:27
A button f(x) added. It opens a calculation section with helpful calculation functions. A proportion calculation is available.
Build 852284417v2.12022-09-18 18:00:53
Now you can view the history of measurement sessions. The History button is added below the Instructions button.
Adjusted graphical layout for new iPhone.
Build 844825964v2.02021-10-21 18:39:59
Moved instructions from the main view to a separate view to allow more screen space. Especially important for smaller devices.
Instructions are amended with description of the selector “Without Reset”.
Build 841968050v1.32021-04-28 02:31:38
Adjustments are done for the magnetic field scan time to expand swift speed range.
Swift loop length value can now be adjusted at any time and already measured yarn results will be automatically updated.
Build 841299133v1.22021-04-15 01:33:01
The following functions were added in this version:
- iPad support;
- Portrait top home button support (depends on device model). This can be useful when you want to locate the device upside down in order to better sense the magnetic field and still have reading of the screen;
- "Without RESET" mode which allows to continue/resume yarn measurement after STOP button is pressed;
- Localization for Russian language;
- Improved scaling of the user interface for small devices.
Build 841095121v1.12021-03-27 16:03:34
Scaling for smaller screens improved. New function added to keeping device awake while in process of measuring (upon pressing START button). This mode is deactivated after measuring process is stopped (STOP button is pressed).
Build 840998554v1.02021-03-26 00:55:42
No pricing data captured yet — comparisons appear once the app has paid storefronts or in-app purchases.
Availability 1 of 1 storefronts
| Region | Language | Price | Ratings | Avg | Version |
|---|---|---|---|---|---|
| US | en-US | Free | 0 | — | 2.5 |
Change log 12 changes · US
✎
releaseNotes updated
Added function of reverse rotation in case you need to undo some loop counts while winding on a skein.
✎
description updated
Ensure your device is equipped with magnetometer.
Mount a magnet (e.g. fridge magnet) on the end of one of your Swift's shoulders bottom side.
Measure the lengt
✎
name updated
Yarn Yardage
◆
Version 2.5 released
Added function of reverse rotation in case you need to undo some loop counts while winding on a skein.
◆
Version 2.3 released
Added Before/After yarn washing modes of taking measure on the app's front-end. Default is Before Washing.
Added Work Title on the app's front-end so that it can be captured during taking a screenshot and also recorded in the history for fu
◆
Version 2.2 released
A button f(x) added. It opens a calculation section with helpful calculation functions. A proportion calculation is available.
◆
Version 2.1 released
Now you can view the history of measurement sessions. The History button is added below the Instructions button.
Adjusted graphical layout for new iPhone.
◆
Version 2.0 released
Moved instructions from the main view to a separate view to allow more screen space. Especially important for smaller devices.
Instructions are amended with description of the selector “Without Reset”.
◆
Version 1.3 released
Adjustments are done for the magnetic field scan time to expand swift speed range.
Swift loop length value can now be adjusted at any time and already measured yarn results will be automatically updated.
◆
Version 1.2 released
The following functions were added in this version:
- iPad support;
- Portrait top home button support (depends on device model). This can be useful when you want to locate the device upside down in order to better sense the magnetic field
◆
Version 1.1 released
Scaling for smaller screens improved. New function added to keeping device awake while in process of measuring (upon pressing START button). This mode is deactivated after measuring process is stopped (STOP button is pressed).
◆
Version 1.0 released