Home › Business
US
1 of 1 storefronts
Content in en-US
Content in en-US
Information
Preview 2 platforms
iPhone 10 images
iPad 10 images
What’s New Version 1.7.0
- Added support for MR4.4 and MR4.5
- Improved overall stability and performance
- Updated app components to the latest versions
- Improved stability of PIR camera views
- Fixed issues affecting door opening in forced state
Description
Mobile app to interact and control your Advisor Advanced security panel from remote.
With the latest addition of the UltraSync cloud solution, you may benefit from receiving push messages of every event generated in your security system. This can be an alarm event, someone arriving in the morning or evening, and even receiving a message that a picture was taken locally which can be downloaded by the app.
Provides peace of mind to every home or business owner. When away on business trip or on holiday you can easily check the status of your intrusion system. If you forgot to arm you can take immediate action to arm the system remotely, without having to drive back or to depend on others.
It also helps to open a door or gate remotely when there is a delivery service. Outputs can also be used to switch on heating in wintertime in order to heat your premises awaiting your arrival.
To consult the history of the events you can easily swipe to the event log page and scroll through the event list to check for example who armed the system at what time or when a door was opened to
provide access to a specific user.
To benefit from this interactivity, we advise you to consult with your installer to enable this functionality towards your Advisor Advanced intrusion system.
Accessibility
ipadiphonemacrealityDevicetvoswatch
Version history 25 versions
Build 886277922v1.7.02026-06-10 07:02:50
- Added support for MR4.4 and MR4.5
- Improved overall stability and performance
- Updated app components to the latest versions
- Improved stability of PIR camera views
- Fixed issues affecting door opening in forced state
Build 881525510v1.6.92026-01-30 12:57:16
- Added support for MR4.3 and MR4.13
- Updated the privacy notice
- Updated translations
- Fixed missing data in logs for wired PIR cameras
- Fixed a crash on the event log page
Build 879339845v1.6.82025-11-03 07:20:52
- Added support for MR4.2
- Fixed the connection issue when daylight saving time (DST) is disabled
- Rebranded to Kidde Global Solutions
- Updated the online help
- Added missing translations
Build 877913014v1.6.72025-09-11 06:04:36
- Added support for MR4.1
- Added auto-connect functionality
- Added sorting to devices and users lists
- Optimized loading for larger setups
- Fixed problems during Walk Test
- Fixed notifications on standalone cameras
- Improved app stability by fixing crashes and bugs
- Fixed geofencing issues on iOS 18
Build 875041779v1.6.62025-05-29 10:42:33
- The dashboard page has been removed for intrusion panels
- Removed the fault confirmation functionality for intrusion panels
- Fixed a problem where the status remained stuck in 'pending ACK(s)’
- Added a new announcement
Build 873363852v1.6.52025-04-14 06:18:00
- Added support for Access Controller: Axon2600
- Added support for ATS4700:
- 16 standard doors
- 64 areas
- 1000 zones
- 6 Wired PIRCams
- Added dashboard for Intrusion panels
- Added Faults confirmation mechanism
- Added support for iOS18
- Added Privacy Notice
- Improved User management
- Improved notification mechanism
- Improved geofencing mechanism
- Added distinction of events on video timeline
Build 871266085v1.6.42024-12-22 20:22:02
- Added support for Axon MR3.3 (including Wired Pircam)
- Added Axon MR3.2 support (ATS1700 with up to 48 zones)
- Added biometric authentication
- Added option to adjust timeline intervals
- Resolved startup crashes
- Fixed rendering of zones with names longer than 16 characters
- Fixed notification activation issues for video devices
- Critical notifications play a siren even in silent mode
- Enhanced Live View recording
- Enabled removing recorders with active notifications but lost access
Build 867311189v1.6.32024-07-11 07:13:27
- Added support for Axon MR 3.1
- Fixed issue in which a user in the supervisor group couldn't add or edit other users
- Corrected panel version displayed after the panel has been upgraded
- Disabled Safetel connection for Axon panels in the application
- Improved geofencing mechanism
- UI/UX changes improved in the video page layout
- The app no longer supports iOS12
Build 866128395v1.6.22024-05-23 04:56:59
- Updated EULA agreement
- Updated EULA agreement mechanism
- Support for Axon MR3.0
- Support for TVN23 UltraSync-enabled recorder
- Support for New UltraSync stand-alone cameras
- Support for ATS MR4.11
- Improved reset mechanism for incoming notifications
- Disabled, by default, receiving Set/Unset and Access notifications
- Added support for Lithuanian language
- Updated framework and UI/UX:
- Updated video full-screen layout
- Improvement in displaying notifications
Build 864786491v1.6.12024-03-28 07:53:18
- Fixed issue preventing user from accepting End-User License Agreement
Build 864475573v1.6.02024-03-18 11:03:51
- Updated framework and UI/UX
- Support for iOS 17
- Updated end-user license agreement. The user needs to accept EULA before accessing the app
- Improved notification stability
- Improvement by showing the correct timestamp when playback
- Improvement for Remote Access notifications.
Build 861298349v1.5.22023-11-08 06:17:06
- Installers approval to remotely access the TruVision UltraSync enabled recorders via the recorder's web page
- UI/UX improvements and improved visualization
- Improved notifications delivery mechanism for more reliable delivery
- Support for Axon Security platform
Build 858369148v1.5.12023-07-12 07:45:33
- Added video snapshot functionality
- Added video recording functionality (Live view only)
- Fixed connection issues when accessing ATS via DirectIP or Safetel connection
- Fixed crashes occurring when users try to remove a saved security panel
- Added UI/UX improvements
Build 855252663v1.5.02023-05-30 06:14:29
- Added Video functionality for UltraSync supported recorders:
- Live view
- Playback view
- Event Notifications, eg. Motion detected, Video loss, Tamper detected, I/O alarms
- Alarm panel changes:
- Fixed issues concerning forced set/normal set
- Improved connectivity over LTE network
- Added personalized Logo functionality
Build 852431978v1.4.72022-09-26 15:53:07
• Added iOS16 support
• Added zone identification. The user can choose how to display zone identification, zone ID or Zone location under settings
• Improved navigating and automatic login to the panel after the user taps the notification
• Restored the Force Set action button on the Areas page
• User’s phone number is no longer deleted after the data has been modified under settings
• Improved User management page for a better user experience
• Displaying notifications when the app is in the foreground or when the app is being used.
Build 849382406v1.4.62022-06-30 06:11:50
- Display active alarms and faults on the area page.
- Announcement functionality and separate announcements menu bar.
- Improved information dialogue when a user tries to force set area but forced set is disabled for the user group.
- Improved information dialogue if the user does not have access to the event log.
- Improved Areas & User management for a better user experience.
- Renamed "Home Automation" into "Automation."
- Improved Help page content
- Fixed crash when the user leaves the event log settings page
- Translations for system dialogue texts
- Fixed crash when displaying popup dialogue
Build 848110936v1.4.52022-04-13 05:37:08
- Improved limited door control management for normal users
- Fix: area control issues for panel versions MR2.0 and lower
- Fix: crashes that could occur when trying to add triggers to geofencing actions
- Fix: Home Automation Triggers support for panel version MR1.0
Build 847173870v1.4.42022-02-17 14:34:22
- Mark notifications for alarms as critical
- Improved responsiveness of walktest screen
- Dedicated screen for walktest results
- Export walktest report in HTML format
- Configure and observe state of output in Home Automation
- Improve error message when door action fails
- Add information about pending alarms when area is setting
- Show physical number of expander and zone
- Change order of door actions
- Add invert trigger action in to geofencing actions
- Update UI for PIR Cameras pages
- Add prompt for battery optimization exempt in push notifications settings
- Official support for iOS 15
Known issues:
- App may disconnect from panel during export of walktest report (affects iOS12 and lower)
Build 843802925v1.4.32021-10-26 19:48:04
- Update UI/UX of Panel setup, Password setup, Application and Panel setting
- Show input number next to the input (zone) name
- Respect walk-test permissions granted to user
- Setting to use absolute or relative timestamp in event log
- Fix: Force arm area with status not ready to set
- Fix: Control of area with a medic alarm active
- Fix: Remove registration for UltraSync notifications when deleting panel and PIN is not saved
- Improve stability on iOS 15
Build 842924121v1.4.22021-07-05 04:05:38
- Added support for control panel firmware version 4.7
- Added user management feature starting from control panel firmware version 4.7
- Improved stability of application
Known issues:
- Some zone statuses are only available for supervisor
- Force-set in case of an active fault returns an error
- Alarm notifications are silent when phone is on "do not disturb" mode
Build 841173572v1.4.12021-04-02 07:58:07
Fixed not showing popup PIN prompt popup in some configurations
Improved stability of the app
Minor UI adjustments
Build 841002137v1.4.02021-03-22 20:25:27
Added door control feature for standard doors on panel. Intelligent doors on CDC4 will be added in later releases
Added support for "pending" alarms
Redesigned area list layout for improved usability
Added "eye" icon in password fields to show password when typing
Removed "garbage" icon from panel selection, long tap on panel navigates to panel settings
Streamlined the PIN entry flow
Improved panel events support
Improved application security
Improved stability of the application
Fixed incorrect app language problem
Fixed some minor issues and bugs
Known issue: force-set in case of an active fault returns an error.
Known issue: alarm notifications are silent when phone is on "do not disturb" mode.
Build 840003159v1.3.42021-01-13 00:10:45
- Improved stability of application
Build 839592377v1.3.32020-12-17 01:59:19
- Added application password reset feature
- Added displaying list of available triggers in Home Automation
- Added automatic loading more events when scrolling event log
- Battery resistance value is shown in event log now
- Fixed problems with walktest
- Fixed overwriting notifications in status bar with the latest notification
- Overall stability of the application increased
- Finished support for old versions of iOS. Support iOS11+
Build 837395281v1.3.22020-09-23 08:58:51
Fixed issue with device language detection.
Enabled language selection in system settings on iOS 13 or later.
No pricing data captured yet — comparisons appear once the app has paid storefronts or in-app purchases.
Availability 1 of 1 storefronts
| Region | Language | Price | Ratings | Avg | Version |
|---|---|---|---|---|---|
| US | en-US | Free | 1 | 4.0 | 1.7.0 |
Change log 28 changes · US
✎
releaseNotes updated
- Added support for MR4.4 and MR4.5
- Improved overall stability and performance
- Updated app components to the latest versions
- Improved stability of PIR cam
✎
description updated
Mobile app to interact and control your Advisor Advanced security panel from remote.
With the latest addition of the UltraSync cloud solution, you may benefit
✎
name updated
Advisor Advanced Pro
◆
Version 1.7.0 released
- Added support for MR4.4 and MR4.5
- Improved overall stability and performance
- Updated app components to the latest versions
- Improved stability of PIR camera views
- Fixed issues affecting door opening in forced state
◆
Version 1.6.9 released
- Added support for MR4.3 and MR4.13
- Updated the privacy notice
- Updated translations
- Fixed missing data in logs for wired PIR cameras
- Fixed a crash on the event log page
◆
Version 1.6.8 released
- Added support for MR4.2
- Fixed the connection issue when daylight saving time (DST) is disabled
- Rebranded to Kidde Global Solutions
- Updated the online help
- Added missing translations
◆
Version 1.6.7 released
- Added support for MR4.1
- Added auto-connect functionality
- Added sorting to devices and users lists
- Optimized loading for larger setups
- Fixed problems during Walk Test
- Fixed notifications on standalone cameras
- Improved app
◆
Version 1.6.6 released
- The dashboard page has been removed for intrusion panels
- Removed the fault confirmation functionality for intrusion panels
- Fixed a problem where the status remained stuck in 'pending ACK(s)’
- Added a new announcement
◆
Version 1.6.5 released
- Added support for Access Controller: Axon2600
- Added support for ATS4700:
- 16 standard doors
- 64 areas
- 1000 zones
- 6 Wired PIRCams
- Added dashboard for Intrusion panels
- Added Faults confirmation mechanism
- Added supp
◆
Version 1.6.4 released
- Added support for Axon MR3.3 (including Wired Pircam)
- Added Axon MR3.2 support (ATS1700 with up to 48 zones)
- Added biometric authentication
- Added option to adjust timeline intervals
- Resolved startup crashes
- Fixed rendering of zo
◆
Version 1.6.3 released
- Added support for Axon MR 3.1
- Fixed issue in which a user in the supervisor group couldn't add or edit other users
- Corrected panel version displayed after the panel has been upgraded
- Disabled Safetel connection for Axon panels in th
◆
Version 1.6.2 released
- Updated EULA agreement
- Updated EULA agreement mechanism
- Support for Axon MR3.0
- Support for TVN23 UltraSync-enabled recorder
- Support for New UltraSync stand-alone cameras
- Support for ATS MR4.11
- Improved reset mechanism for inco
◆
Version 1.6.1 released
- Fixed issue preventing user from accepting End-User License Agreement
◆
Version 1.6.0 released
- Updated framework and UI/UX
- Support for iOS 17
- Updated end-user license agreement. The user needs to accept EULA before accessing the app
- Improved notification stability
- Improvement by showing the correct timestamp when playback
-
◆
Version 1.5.2 released
- Installers approval to remotely access the TruVision UltraSync enabled recorders via the recorder's web page
- UI/UX improvements and improved visualization
- Improved notifications delivery mechanism for more reliable delivery
- Support
◆
Version 1.5.1 released
- Added video snapshot functionality
- Added video recording functionality (Live view only)
- Fixed connection issues when accessing ATS via DirectIP or Safetel connection
- Fixed crashes occurring when users try to remove a saved securit
◆
Version 1.5.0 released
- Added Video functionality for UltraSync supported recorders:
- Live view
- Playback view
- Event Notifications, eg. Motion detected, Video loss, Tamper detected, I/O alarms
- Alarm panel changes:
- Fixed issues concerning forced
◆
Version 1.4.7 released
• Added iOS16 support
• Added zone identification. The user can choose how to display zone identification, zone ID or Zone location under settings
• Improved navigating and automatic login to the panel after the user taps the notification
◆
Version 1.4.6 released
- Display active alarms and faults on the area page.
- Announcement functionality and separate announcements menu bar.
- Improved information dialogue when a user tries to force set area but forced set is disabled for the user group.
- Impr
◆
Version 1.4.5 released
- Improved limited door control management for normal users
- Fix: area control issues for panel versions MR2.0 and lower
- Fix: crashes that could occur when trying to add triggers to geofencing actions
- Fix: Home Automation Triggers supp
◆
Version 1.4.4 released
- Mark notifications for alarms as critical
- Improved responsiveness of walktest screen
- Dedicated screen for walktest results
- Export walktest report in HTML format
- Configure and observe state of output in Home Automation
- Impro
◆
Version 1.4.3 released
- Update UI/UX of Panel setup, Password setup, Application and Panel setting
- Show input number next to the input (zone) name
- Respect walk-test permissions granted to user
- Setting to use absolute or relative timestamp in event log
◆
Version 1.4.2 released
- Added support for control panel firmware version 4.7
- Added user management feature starting from control panel firmware version 4.7
- Improved stability of application
Known issues:
- Some zone statuses are only available for sup
◆
Version 1.4.1 released
Fixed not showing popup PIN prompt popup in some configurations
Improved stability of the app
Minor UI adjustments
◆
Version 1.4.0 released
Added door control feature for standard doors on panel. Intelligent doors on CDC4 will be added in later releases
Added support for "pending" alarms
Redesigned area list layout for improved usability
Added "eye" icon in password fields t
◆
Version 1.3.4 released
- Improved stability of application
◆
Version 1.3.3 released
- Added application password reset feature
- Added displaying list of available triggers in Home Automation
- Added automatic loading more events when scrolling event log
- Battery resistance value is shown in event log now
- Fixed prob
◆
Version 1.3.2 released
Fixed issue with device language detection.
Enabled language selection in system settings on iOS 13 or later.