Audio Evolution Mobile Studio

* Solved a crash that could occur when loading a project and the option to display the master channel in the track mixer was enabled. * Added a MIDI 'Panic' button to Live Performance mode. * Added a new parameter 'Leslie mode 2' to Evolution B3 where the first third is off, then slow, then fast which is easier to use with an expression pedal. * The Mute button could not be toggled for master/group channel in Live Performance mode. Solved.

* Solved a crash when trying to delete a file in the File Browser when the file had non-standard characters. * Solved a crash when importing a file by drag&drop under certain conditions. * Changing live performance mode state will now only take place after a restart.

* When not using the device's native sample rate, playback and recording could stop with a failure message. Solved. * When leaving the Settings dialog, some settings like 'Reverse sustain pedal' did not come into effect directly. Solved. * Solved an issue where 'Reverse sustain pedal' did not work correctly with multiple tracks armed. * Solved a crash in live performance mode when adding a track when a track was armed. * If AudioBus was active, tracks were un-armed when starting to record. Solved. * In Live Performance mode, the user interface of AUv3 instruments was not displayed for iPhones. Solved. * The beta option to change Storage Location would cause a crash since the addition of the Live performance mode option. Solved.

* When leaving the Settings dialog, some settings like 'Reverse sustain pedal' did not come into effect directly. Solved. * Solved an issue where 'Reverse sustain pedal' did not work correctly with multiple tracks armed. * Solved a crash in live performance mode when adding a track when a track was armed. * If AudioBus was active, tracks were un-armed when starting to record. Solved. * In Live Performance mode, the user interface of AUv3 instruments was not displayed for iPhones. Solved. * The beta option to change Storage Location would cause a crash since the addition of the Live performance mode option. Solved.

* When leaving the Settings dialog, some settings like 'Reverse sustain pedal' did not come into effect directly. Solved. * Solved an issue where 'Reverse sustain pedal' did not work correctly with multiple tracks armed. * Solved a crash in live performance mode when adding a track when a track was armed. * If AudioBus was active, tracks were un-armed when starting to record. Solved. * In Live Performance mode, the user interface of AUv3 instruments was not displayed for iPhones. Solved. * The beta option to change Storage Location would cause a crash since the addition of the Live performance mode option. Solved.\n" +

* The volume peak calculation for the right channel of a stereo track was wrong in situations where a zero-crossing needed to be calculated. Solved. * 'Add track' in Live Performance mode could cause a crash when 16 or more tracks were present. Solved. * Saving a project in Live Performance would un-arm the tracks and the arm state was therefore not stored. Solved. * Selecting MIDI remote setup would un-arm the tracks. Solved. * Improved memory management when switching Soundfonts. * Added Portamento on/off and Portamento time parameters to ADSR displays of the virtual keyboard and Live mode. * Added a 'MIDI remote control' option to the menu of the EQ section in the mixer channel. * Added a 'MIDI remote control' option to the menu of the ADSR controls in the virtual keyboard. The MIDI remote control setup dialog has this functionality, but applies to all armed tracks. * The app is now able to display in full screen on a Mac.

* The volume peak calculation for the right channel of a stereo track was wrong in situations where a zero-crossing needed to be calculated. Solved. * 'Add track' in Live Performance mode could cause a crash when 16 or more tracks were present. Solved. * Saving a project in Live Performance would un-arm the tracks and the arm state was therefore not stored. Solved. * Selecting MIDI remote setup would un-arm the tracks. Solved. * Improved memory management when switching Soundfonts. * Added Portamento on/off and Portamento time parameters to ADSR displays of the virtual keyboard and Live mode. * Added a 'MIDI remote control' option to the menu of the EQ section in the mixer channel. * Added a 'MIDI remote control' option to the menu of the ADSR controls in the virtual keyboard. The MIDI remote control setup dialog has this functionality, but applies to all armed tracks. * The app is now able to display in full screen on a Mac.

* This update adds Evolution B3, a new tonewheel organ emulation instrument, and a Rotary Speaker effect. Both are included in one single in-app purchase and cannot be bought separately. Evolution B3 highlights: * models 91 tonewheel oscillators, key click, leakage, percussion, scanner vibrato/chorus etc. * separate upper, lower and pedal manuals with independent MIDI channels * full MIDI remote control of every parameter including the drawbars Rotary Speaker highlights: * models rotating horn, doppler effect, cabinet, mic etc. * adjustable slow/fast horn speed, crossover, mic distance and cabinet reflections * Unlock the complete sample loop collection in one low price purchase of 4.49 euro ex VAT. This bundle includes all 18 sample loop packs (869MB!), with a wide range of professionally produced loops from Function Loops. Loop packs cannot be purchased separately anymore. * BETA: Added a 'Live performance' mode targeted at people who use the app primarily for playing virtual instruments on stage. The feature can be activated in the BETA settings (Live Performance mode (BETA)). In 'Live performance' mode, the app creates 16 instrument tracks (or what you set as 'Initial number of tracks' in the 'Live performance' settings), mixer channels are optimized for arming tracks and switching instruments, and there is a 'FX stack' option to display the most common effects at once for quick access. * Besides this, projects/songs can be added to set lists to quickly jump between songs, including by MIDI CC. * Note that this is a BETA feature, please contact us by e-mail when you find issues or have suggestions for improvement. * Improved mixer scrolling: now smooth instead of stepped. * Added a non-realtime Denoise option to the 'Apply effects' menu item in the audio clip pop-up menu. * Added an option 'Display master channel in track mixer' to the Mixer settings. * Added a 'MIDI learn' button to the key range option in the MIDI input dialog. * Added '-12' and '+12' buttons to the Transpose option in the MIDI input dialog. * Added a 'Tube Drive' plug-in. * Unfreezing a track while playing could cause a crash. Solved. * When pasting a MIDI clip to a different track, the MIDI channel of the note on's were changed accordingly, but not the note off's which could lead to hanging notes. Solved. * Added a Spanish translation. * Solved a memory leak when loading projects where Soundfonts remained in memory.

* In the MIDI remote setup dialog, when using MIDI learn, the textbox did not get updated directly with the MIDI CC value. Solved. * 'All MIDI channels' setting did not work in MIDI remote setup. Solved. * 'Arm by MIDI PC' in the MIDI remote control editor did not work anymore. Solved. * 'Import' in the multi-instrument drum pattern sound selection dialog did not always work. Solved.

'Import' in the multi-instrument drum pattern sound selection dialog did not work when choosing the option 'Directory'. Solved.

* Solved a possible crash when duplicating a track. * Track names are now stored when exporting to a MIDI file. * Solved an issue with ADSR changes not being applied.

* Added a 'Project storage folder' option to the BETA settings where you can change the storage folder for projects to a USB drive for example. * Added an option 'Input velocity' to the MIDI input dialog which opens a dialog where you can set the input velocity curve. This can be stored either per MIDI device or per track. The 'Output velocity range' option has been removed and if it was set, it is now mapped to the input velocity curve. * Many changes to MIDI remote setup: - Added Latched/unlatched and MIDI channel columns to support a wider variety of MIDI controllers with different button behaviors. - Because of that, 'Play triggers at 127 only' and 'Arm toggles' have been removed since they can be controlled by turning Latched on or off. - 'First available input' is now changed to 'All'. * When loading a project with two similar USB MIDI keyboards attached, the app should now assign the correct input to the tracks, given the project was saved with this version. * Solved an issue with AUv3's not recording MIDI channel pressure, like the GeoShred Tenor Sax. * Ported the 'Load Project' and 'Instrument selection' dialogs to JUCE. * Solved issues with default note velocity in the drum pattern editor. * Mix-down to M4A format with a sample rate of 48000Hz was not possible anymore. Solved. * Solved bugs in and improved the Compressor.

* Added an option 'By BPM' to the time stretch dialog where you can enter a source and target BPM. * Added an option 'Ignore MIDI volume (CC 07)' to the MIDI input dialog. * Added an option 'Ignore pitch bend' to the MIDI input dialog. This can help with faulty MIDI keyboards that erroneously send pitch bend messages. * Added an option 'Solo exclusive mode' to the Mixer channel settings. * Solved a possible crash when loading a project with AudioBus active. * The setting 'Ignore other MIDI CC's was not saved. Solved. * The time stretch button in the piano roll editor did not work anymore. Solved. * Available memory display in the instrument selection dialog now gets updated every second which is more reliable since Soundfonts are loaded in the background. * Wheels on/off state in the virtual keyboard is now remembered.

* Long-pressing a Soundfont in the instrument selection dialog now opens a menu where you can choose to delete the Soundfont. * Added a search field to the automation parameter selection and MIDI CC selection dialogs. * Calculation of the pre-computed graphics file for audio clips now happens in the background. For long audio clips, this could mean that the waveform is not displayed directly after importing or recording and that 'Loading...' is displayed in the clip. * Loading a project name with international characters didn't work. Solved. * Values are now displayed underneath the graphic EQ sliders for iPads.

* Note offs are now sent to an AU MIDI after stopping playback. Before, starting playback could still have a hanging note that was processed. * Added 'Render to a MIDI file' to the track pop-up of instrument and MIDI tracks so you can save individual tracks to a MIDI file. * Solved a possible crash that could occur when disconnecting or connecting a USB audio device. * Audio tracks are now unarmed when attaching/detaching an audio device.

* Added search fields to the instrument selection and effect selection dialogs. * Parameters with automation points are now displayed on top in the parameter selection menu. * Added an option 'Show MIDI channel button in piano roll' to the MIDI settings. This can be helpful with Audio Units like the (upcoming) Battallion drum machine. * The FX Send block now displays the target bus name as subscript. * Opening the MIDI remote control for effect parameters twice could result in the MIDI learn not working anymore. Solved. * When swapping effects with a side chain, the side chain wasn't swapped as well. Solved. * A connection from the IN block to the second row was not set when loading a FX grid. Solved. * User-defined drum kits were not displayed in the multi-instrument selection section. Solved.

* Added an option 'Track selection' to the 'Export to other DAW' dialog. * Solved an issue where MIDI notes could be drawn outside of the clip. * Selecting a subdirectory in the instrument selection dialog could cause a crash. Solved. * Solved a crash after arming a pure MIDI track when the input was set to 'Virtual keyboard'. * Scan for BT MIDI devices didn't work anymore. Solved. * Solved a freeze when loading a project with a freezed track with more than 2 Fx Sends.

* Added a 'Trim end' option to the 'Auto split' dialog. * Added a Mute/Unmute option to the clip pop-up menu (except for clips on pure MIDI tracks). * 'Auto split' was not calculated correctly for stereo clips. Solved. * Clip volume and fades did not work for a multi-drum pattern track. Solved. * Markers could be placed incorrectly when tempo changes were present. Solved.

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved. * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved. * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved. * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved. * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n" * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved. * When a MIDI device transmitted Active Sensing events, this could lead to other MIDI events not being parsed correctly, which could result in hanging notes etc. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n" * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved. * AudioShare stopped working in iOS18. Solved. and more..

* Many actions can now be done during playback, most of them without a pause, some with a short pause. * Changed the colors of the piano roll and drum pattern editor into a dark mode. * Added a 'Multi-instrument' option when creating a drum pattern track: in this mode, you can assign an audio file or a sound from a Soundfont to a drum 'lane'. This makes it possible to use your own sounds in the drum pattern editor. Each drum lane now also features its own audio processing chain, meaning that it has its own effects grid, volume, panning, ADSR, pitch shift and basic reverb controls. You can use the iOS drap & drop mechanism to import drum sounds as well (max. file size 4MB). * A free drum sound pack consisting of 80 high quality drum samples for use with the multi-instrument drum pattern editor can be downloaded. It features a wide range of kicks, snares, hihats, toms, etc. sorted by different genres: 80's Retrowave, Acoustic, EDM, Foley, Hip Hop, Industrial and Reggaeton. * Optional in-app purchase to extend the free drum sound pack with 420 more high quality drum samples. * Added multi-output support for AUv3 instruments. Additional outputs can be sent to mix busses. * New Settings screen to match the app's style. * Multiple mixer controls can now be adjusted simultaneously. * Added an 'Import Soundfont' option to the instrument selection dialog (although Soundfonts can always be copied directly using the Files app to the AudioEvolution/SoundFonts folder). * Added a 'Share' option to the file pop-up menu in the file browser. * Added an option 'Draw grid on top of clips' which now defaults to 'off'. * Changes to tempo markers can now be undo/redone. * The audio input dialog now makes it possible to select between different inputs of the device itself, so you can for example select the iPad microphone even if a headset is connected. * The state of the AU button in the instrument display is now remembered and stored with the project. * When editing notes outside the current clip area, the clip will now be automatically expanded. * Added a Quantize option to the pop-up menu of selected notes in the piano roll editor. * Added a 'Select all' button to the piano roll editor in Edit mode. * The mixer can now be scrolled when dragging in the volume slider area. * The available memory is now displayed in the instrument selection dialog. The app will now refuse to load Soundfonts when the available memory is lower than 250MB to prevent out-of-memory crashes. * Added an 'Auto split' option to the audio clip pop-up menu. * Added an option 'MIDI loop recording'. * Added an option to test the new plug-in delay compensation that works for both audio and instrument tracks (non-armed) to the BETA section of the new settings dialog. * The size of the AU MIDI view is now remembered and stored in the project (half/full size) and the option 'Open AU in full screen' has been removed from the Settings. * Portuguese translation * Solved a crash that could occur when MIDI was received while adding or removing a track. * Replacing an effect with the display active of the target effect block could cause a crash. Solved. * A split point could be erroneously added when moving your finger beyond the display edge. Solved. * Long-tapping a position on the arranger screen and selecting Paste could paste at the wrong location. Solved. * MIDI parameter control settings for Evolution One were not set when loading a project. Solved.\n" * Solved a timing issue for MIDI events being recorded from a AU MIDI processor. * Marquee selection in the piano roll did not handle scrolling correctly. Solved. * Selected events in the piano roll could be moved to a negative offset. Solved. * Pasting a MIDI clip with multiple MIDI channels would reset all the MIDI channels to one and the same channel. Solved. * AudioShare stopped working in iOS18. Solved. and more..